Air Shutter Setting - Heatilator RBV4236IH Owner's Manual

I. Air Shutter Setting
• The logs and burner must be removed to access the air
shutter. Refer to Section 12.F.
• Remove the two screws attaching the front burner support
to the fi rebox bottom. See Figure 12.16.
Figure 12.16 Remove Screws Attaching Front Burner Support
• Remove the two screws attaching the back burner support
to the burner pan. See Figure 12.17.
Figure 12.17 Remove Screws Attaching Back Burner Support
Heatilator • RBV4236/RBV4842 • 4048-210 Rev K • 02/07
• Slide the burner assembly to the left and remove from the
appliance. See Figure 12.18.
Figure 12.18 Side Burner Assembly to Left
• The shutter can be adjusted as shown in Figure 12.19
• Closed position - natural gas
• Open position - propane
Figure 12.19 Adjust Air Shutter
29