Appliance Setup; Remove The Shipping Materials; Clean The Appliance; Accessories - Heatilator RBV4236IH Owner's Manual

12 12

Appliance Setup

A. Remove the Shipping Materials
Remove shipping materials from inside or underneath the
fi rebox.
B. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated in-
side the fi rebox or underneath in the control cavity.
C. Accessories
Install approved accessories (refer to Section 16) per in-
structions included with accessories.
WARNING
Shock Risk
Fire Risk
Use ONLY optional accessories approved
for this appliance.
• Using non-listed accessories voids
warranty.
• Using non-listed accessories may result
in a safety hazard.
• Only Hearth & Home Technologies
approved accessories may be used
safely.
D. Log Assembly
• Base logs have been permanently mounted on the grate
assembly and should not be moved. See Figure 12.1.
Figure 12.1 Base Logs
Heatilator • RBV4236/RBV4842 • 4048-210 Rev K • 02/07
• Install Y-shaped log on right side of grate using locating
pins to position. See Figure 12.2.
Figure 12.2 Placing Right Top Log
• Install left top log as shown in Figure 12.3 using locating
pins to position log properly.
Figure 12.3 Placing Left Top Log
25