Important Safety Instructions - Dish Network 311 User Manual

Important Safety Instructions

1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4
Follow all instructions.
5
Do not use the apparatus near water.
6
Clean only with a dry cloth.
7
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10
Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11
Only use attachments/accessories specified by the manufacturer.
12
Unplug the apparatus during lightning storms or when unused for long periods of
time.
13
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as the power supply cord or plug
is damaged, liquid has been spilled or objects have fallen into it, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been
dropped.
14
The power plug must be readily accessible so that the apparatus can be easily
disconnected from the AC power.
15
The receiver is still connected to the AC power whenever it is plugged into a live
power outlet, even if it is turned off using the remote control or front panel
buttons.
16
No flame sources, such as lit candles, should be placed on the equipment.
17
The apparatus shall not be exposed to dripping or splashing, and no objects filled
with liquids, such as vases, shall be placed on the top of it.
18
Operate the receiver using only the type of power source indicated on the
marking label. Unplug the receiver power cord by gripping the power plug, not
the cord.
19
Do not overload wall outlets or extension cords; this can result in a risk of fire or
electrical shock.
20
Never insert objects of any kind into the receiver through openings, as the
objects may touch dangerous voltage points or short out parts. This could cause
fire or electrical shock.
21
Do not locate the antenna near overhead light or power circuits, or where it can
fall into such power lines or circuits. When installing the antenna, take extreme
care to avoid touching such power lines or circuits, as contact with them can be
fatal.
22
Do not attempt to service the receiver yourself, as opening or removing covers
may expose you to dangerous voltage and will void the Limited Warranty. Refer
all servicing to authorized service personnel.
23
Unplug the receiver from the AC power outlet before cleaning.
Page iii