Installing and configuring VPN
Use the following procedure to install and configure VPN on your IP
Phone.
Note: Depending on the version of software installed on your IP
Phone you may need to upgrade the software on the IP Phone prior
to configuring the VPN feature.
To install and configure VPN
1. Follow the instructions provided by your system administrator to
obtain the required files.
2. Power-down the IP Phone.
3. Run the Nortel Phone VPN Configuration Wizard.jar file.
The Welcome & language selection window of the Wizard appears,
as shown in
Figure
Figure 11: Welcome & language selection window
11.
Virtual Private Network
47