9. VPN Information
The system administrator can use the
VPN information. This menu is for system administrator use only.
10. Certificate Information
The system administrator can use the
view certificate information. This menu is for system administrator use
only.
Using the 3. Network Configuration menu
The Network Configuration tool displays information that was configured
when the IP Phone was installed. This tool is for administrator use only.
You may need to access this menu to configure specific IP address
information to meet the requirements of your network.
To configure a set for a static IP address:
1. Press the
Services
2. Enter the Admin password.
3. Select
Network
4. Scroll down to
5. Enter the IP address in the
6. Enter the Net Mask in the
7. Enter the Gateway in the
8. Enter DNS IPs (if applicable).
9. Press Apply. The phone reboots.
To obtain an IP Address via DHCP:
1. Press the
Services
2. Enter the Admin password.
3. Select
Network
4. Scroll down to
key twice.
Configuration.
and ensure it is unchecked.
DHCP
Set IP
Net Mask
Gateway
key twice.
Configuration.
and ensure it is checked.
DHCP
Configuring Local Menu options
VPN Information
Certificate Information
field.
field.
field.
menu to view
menu to
109