Before you begin
Connecting the components of the phone
WARNING
Your IP Phone 1140E is shipped with the base locked in
position. To avoid damaging your phone, press the wall-
mount lever, located just under the Handsfree key as
indicated in
and pull it away from the phone.
CAUTION
Damage to Equipment
Do not plug your IP Phone 1140E into a regular
phone jack. This results in severe damage to the
IP Phone. Consult your system administrator to
ensure that you plug your IP Phone into a 10/
100BaseT Ethernet jack.
CAUTION
Your IP Phone 1140E is designed for use in an
indoor environment only.
Figure 5
Connecting the components
on page 38, to release the base
37