To use Automatic Preselection (Meet-me page):
(Goodbye)
or
To use Automatic Post-selection:
The called party is either busy on the IP Phone or away from their desk.
To page the called party, you do not need to redial the number of the
called party.
RadPag
1. Lift the handset.
2. Dial the
Radio Paging Access
The paging tone sounds (two beeps
followed by a dial tone).
3. Dial the number of the party you want to
page. After dialing, the ringback tone
sounds.
The paged person can use any IP Phone
to enter a
Radio Paging Answer
plus their own DN number.
4. If your call goes unanswered for a preset
time period and a 15-second high-
pitched tone sounds followed by silence,
press the
Goodbye
handset.
1. Press the
Radio Page
special dial tone sounds.
Additional call features
FFC.
key or replace the
soft key. A
FFC,
163