Getting Started; Plugging In And Starting The Phone - Aastra 9143i User Manual

Getting Started

The 9143i must be set up and configured prior to its first use. This section describes phone
behavior and start up screens you may see when the phone is first plugged in, or when it is
restarted.

Plugging in and Starting the Phone

The 9143i automatically begins the start up sequence as soon as it is connected. The phone goes
through this process the first time you plug in your phone and every time you restart your phone.
• The phone displays the following startup screens.
• The 9143i phone then checks settings and looks for new configuration and firmware updates
for the phone from a server. If a new update is found, the phone displays the message
"Updating Configuration". This may take a few moments while the phone downloads the
latest updates.
Model 9143i IP Phone User Guide
Note:
New updates to your phone can be automatically scheduled from the server.
This is set up on the phone system by your System Administrator and should be
scheduled during non-business hours or slow call periods.
Important! Do not unplug or remove power to the phone while it is checking or installing
firmware and configuration information.
Initializing
network
Aastra 9143i
Updating
configuration
3