Requirements; Installation And Setup - Aastra 9143i User Manual

• Built-in-two-port, 10/100/1000 Gigabit Ethernet switch - lets you share a connection with
your computer.
• AC power adapter (included)
• Enhanced busy lamp fields*
• Set paging*
*Availability of feature dependant on your phone system or service provider.

Requirements

The 9143i IP Phone requires the following environment:
• SIP-based IP PBX system or network installed and running with a SIP account created for
the 9143i IP phone.
• Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext
Transfer Protocol (HTTP) server, or HyperText Transfer Protocol over Secure Sockets Layer
(SSL) (HTTPS).
• Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN (1000 Mbps)
recommended)
• Category 5/5e straight through cabling (category 6 straight through cabling required for
optimum Gigabit Ethernet performance) Power source
— For Ethernet networks that supply in-line power to the phone (IEEE 802.3af):
— For Ethernet networks that DO NOT supply power to the phone:

Installation and Setup

If your System Administrator has not already setup your 9143i phone, please refer to the Aastra
9143i Installation Guide for basic installation and physical setup of the 9143i. For more
advanced administration and configuration information, System Administrators should refer to
the Aastra Models 9000i and 6700i Series SIP IP Phones Administrator Guide.
2
— For power, use the Ethernet cable (supplied) to connect from the phone directly to
the network for power. (No 48v AC power adapter required.)
— For power, use the 48V AC Power Adapter (included) to connect from the DC
power port on the phone to a power source.
or
— (optional) - For power, use a Power over Ethernet (PoE) power injector or a PoE
switch. A PoE power injector is available as an optional accessory from Aastra
Telecom. Contact your Administrator for more information.
Model 9143i IP Phone User Guide