Flash Key
You can set a programmable key to generate a flash event when it is pressed on the 9143i. You do
this by setting the programmable key to "flash". The IP phone generates flash events only when a
call is connected and there is an active RTP stream (for example, when the call is not on hold).
Configuring a Flash Key
Aastra Web UI
1. Click on Operation->Programmable Keys.
Programmable Keys
2. Select a "Key 1" through "Key 7".
3. In the "Type" field, select flash.
4. Click Save Settings.
Model 9143i IP Phone User Guide
65