Matrix Channel Operations; About Matrix Channels - RSS M-380 Owner's Manual

MATRIX channel operations

About MATRIX channels

MATRIX channels process a mix of the audio signals from AUX1–AUX16 and MAIN L/R, and send them to an output port. You can also select
any two channels from CH1–CH48 and mix them into a MATRIX channel.
fig.MatrixCh.eps
MATRIX 1-8
TO MTX 1, 3...7
MATRIX SEND
TO MTX 2, 4...8
(FROM MAIN)
TO MTX 1, 3...7
MATRIX SEND
TO MTX 2, 4...8
(FROM AUX 1-16)
CH SELECT
FROM CH A
SW SEND
DIRECT OUT 1
DIRECT OUT 48
FROM CH B
Same as the above
TALKBACK
OSCILLATOR
• ATT (Attenuator)
This adjusts the input level.
• EXT INSERT (External insert)
These ports let you use the rear panel CONSOLE IN1–IN8 and CONSOLE OUT1–OUT8 ports to insert external effects processors.
• FX INSERT (Effect insert)
These ports let you insert FX1–FX4.
• FADER
This adjusts the output level.
• BALANCE
This adjusts the left/right balance for stereo-linked MATRIX.
• MUTE
This mutes the output of the channel.
• GEQ INSERT
This port allows you to insert a 31-band GEQ.
66
POST ATT
EXT FX
INSERT
ATT
MTX
LINK
PAN
TO MTX 2, 4...8
TO MTX 2, 4...8
PRE FADER POST FADER
FX
FADER
BAL MUTE
GEQ
INSERT
INSERT
OUTPUT LEVEL
MATRIX 1-8
OUT
SOLO
TO SOLO L
TO SOLO R
TO MONITOR SELECT
TO REC SELECT
OUTPUT
PATCHBAY