Limiting The Range Of Possible Operations - RSS M-380 Owner's Manual

Limiting the range of
possible operations
You can limit the range of operations that are possible by editing the
user levels to correspond to the user settings.
You edit the user level at the USER LEVEL popup.
Accessing the USER LEVEL popup
1.
In the USER section, press [DISP].
fig.ScrUser.eps
The USER screen will appear.
2.
From the user list, select the desired user.
You can't specify the user level for ADMIN.
3.
Press [F5 (USER LEVEL)].
The USER LEVEL popup will appear.
This has four tabs: [F1 (CH 1–24)], [F2 (CH 25–48)], [F3 (AUX/
MAIN/MATRIX)], and [F4 (OTHER)].
• CH 1–24, CH 25–48, AUX/MAIN/MATRIX tabs
fig.ScrUserAccessGuide.eps
A B C
A.Applicable user indication
This indicates the user settings to which the USER LEVEL
popup applies.
B.ADMIN button
Select this option if you want to give ADMIN privileges to the
user.
C.Channel access permission buttons
These buttons select the channels that the user will be able to
operate. The channels that are selected here will be operable.
D
D.Parameter access permission buttons
These buttons select the parameters that the user will be able
to operate for the channels selected by the channel access
permission buttons. The parameters that are selected here will
be operable.
• OTHER tab
fig.ScrUserAccessOthGuide.eps
E.Other parameter access permission buttons
These buttons select other parameters that the user will be
able to operate. The parameters that are selected here will be
operable.
The "TALKBACK" button in the OTHER PARAMETER
ACCESS PERMISSION section enables or disables operation of
the talkback output destination select button (p. 120).
The "OSCILLATOR" button in the OTHER PARAMETER
ACCESS PERMISSION section enables or disables operation of
the oscillator output destination select button (p. 121).
In the USER LEVEL popup, the function buttons perform the
following operations.
[F1 (CH 1–24)] Accesses the CH 1–24 tab.
[F2 (CH 25–48)] Accesses the CH 25–48 tab.
[F3 (AUX/MAIN/ Accesses the AUX/MAIN/MATRIX
MATRIX)] tab.
[F4 (OTHER)] Accesses the OTHER tab.
[F7 (CANCEL)] Cancels the changes and closes the
popup.
[F8 (OK)] Confirms the changes and closes the
popup.
User settings
E
151