Date And Time Settings - RSS M-380 Owner's Manual

5.
Use the name edit field to edit the name of the project files.
You can specify a name of up to eight characters.
For details on name editing, refer to "Editing a name" (p. 39).
6.
Press [F8 (OK)] to finalize the name you edited and close
the popup.
If you press [F7 (CANCEL)], the name edit will be cancelled and
the popup will close.
Delete a project file
1.
Access the SYSTEM screen.
fig.ScrSystem.eps
2.
Press [F3 (LOAD/SAVE)].
fig.ScrSysLoadSave.eps
The LOAD/SAVE popup will appear.
3.
Move the cursor to the project file list, and select the project
file that you want to delete.
4.
Press [F4 (DELETE)].
A message will ask you to confirm the delete file operation.
5.
Press [F8 (DELETE)] to carry out the delete operation.
If you press [F7 (CANCEL)], the operation will be cancelled.
Other settings and functions

Date and time settings

Use the DATE&TIME popup of the SYSTEM screen to set the date
and time.
1.
In the SETUP section, press [SYSTEM].
fig.ScrSystem.eps
The SYSTEM screen will appear.
2.
Press [F5 (DATE TIME)].
The DATE&TIME popup will appear.
fig.ScrSysDateTimeGuide.eps
A B
D E F
A.HOUR knob
This specifies the current hour in a range of 0–23.
B.MINUTE knob
This specifies the current minute in a range of 0–59.
C.SECOND knob
This specifies the current second in a range of 0–59.
D.FORMAT select buttons
These buttons select the format of the date.
You can choose one of the following formats.
MM/DD/YYYY
DD/MM/YYYY
YYYY/MM/DD
E.YEAR knob
This specifies the year in a range of 2000 to 2099.
F.MONTH knob
C
G
Month/Date/Year
Date/Month/Year
Year/Month/Date
175