Main Fader Module; Channel Edit Section - RSS M-380 Owner's Manual

Explanation of the panels
C.
AUX1-12 layer button
This assigns AUX1–AUX12 to the fader module section.
When the USER layer mode is on, this calls up user layer 5 to
the fader module section.
D. CH37-48 layer button
This assigns CH37–CH48 to the fader module section.
When the USER layer mode is on, this calls up user layer 4 to
the fader module section.
E.
CH25-36 layer button
This assigns CH25–CH36 to the fader module section.
When the USER layer mode is on, this calls up user layer 3 to
the fader module section.
F.
CH13-24 layer button
This assigns CH13–CH24 to the fader module section.
When the USER layer mode is on, this calls up user layer 2 to
the fader module section.
G. CH1-12 layer button
This assigns CH1–CH12 to the fader module section.
When the USER layer mode is on, this calls up user layer 1 to
the fader module section.

3. Main fader module

fig.MainFaderModGuide.eps
A
B
C
A. SEL button
This button selects the MAIN channel so that it can be
controlled from the CHANNEL EDIT section or in the screen. It
will light if the MAIN channel is selected.
By repeatedly pressing [SEL] you can alternately select the
MAIN L or MAIN R channels.
B.
SOLO button
This button turns solo on/off for the MAIN L/R channels. It
will light if solo is on.
C.
Fader
This adjusts the signal level of the MAIN L/R channels.
24

4. CHANNEL EDIT section

fig.ChEditSectGuide.eps
C A H
E
D
G
I
In this section you can operate the main parameters of the currently
selected channel.
A. CH DISP button
This button accesses the CHANNEL DISPLAY screen. It will
light red while this screen is displayed.
B.
TOUCH SELECT button
This button turns the Touch Select function on/off. It will light
if the Touch Select function is on.
The Touch Select function lets you select a channel by touching
its fader.
F
B