RSS M-380 Owner's Manual page 177

Formatting USB memory
1.
Access the USB MEMORY popup.
fig.ScrSysUSBMem.eps
2.
Press [F1 (FORMAT)].
fig.ScrFormatConf.eps
A message will ask you to confirm that you want to format the
USB memory.
3.
Press [F8 (FORMAT)] to carry out the Format operation.
If you press [F7 (CANCEL)], the operation will be cancelled.
A progress message will indicate the state of formatting.
When the "Completed" indication appears, formatting is complete.
Do not disconnect the USB memory or switch off the M-380's
power while USB memory is being formatted.
Creating a folder
1.
Access the USB MEMORY popup.
fig.ScrSysUSBMem.eps
2.
In the file list, move to the level at which you want to create
a folder.
3.
Press [F2 (MAKE FOLDER)].
fig.ScrNameEdit.eps
The MAKE FOLDER popup will appear.
Other settings and functions
4.
Use the name edit field to edit the name.
For details on name editing, refer to "Editing a name" (p. 39).
5.
Press [F8 (OK)] to create the folder and close the popup.
Pressing [F7 (CANCEL)] will cancel the operation and close the
popup.
Editing the file or folder name
1.
Access the USB MEMORY popup.
fig.ScrSysUSBMem.eps
2.
In the file list, move the cursor to the desired file or folder.
3.
Press [F3 (NAME EDIT)].
fig.ScrNameEdit.eps
The NAME EDIT popup will appear.
4.
Use the name edit field to edit the name. You can specify a
name of up to twelve characters.
Even if the original name exceeded twelve characters, the name
after editing will not exceed twelve characters.
5.
Press [F8 (OK)] to finalize the name you edited and close
the popup.
If you press [F7 (CANCEL)], the name edit will be cancelled and
the popup will close.
For details on name editing, refer to "Editing a name" (p. 39).
177