Operations Using The Channel Edit Section - RSS M-380 Owner's Manual

AUX channel and MAIN L/R channel operations
Operations using the
CHANNEL EDIT section
Most operations for the MAIN L/R channels and AUX channels can
be performed in the CHANNEL EDIT section.
Here we will explain channel operations using the CHANNEL EDIT
section.
fig.ChEditSection.eps
Selecting the channel to edit
1.
Press [AUX1–12] or [AUX13–16/MTX] layer button.
2.
Use the [SEL] buttons of the fader module section to select
the channel that you want to edit.
fig.SELBtn.eps
[ SEL ]
56
[SEL]
The MAIN [SEL] button will alternately select the MAIN L or
MAIN R channel each time you press it.
3.
The selected channel is shown in the channel indication at
the upper center of the screen.
fig.ScrSelectedAux.eps
If you press [TOUCH SELECT] to turn it on (lit), you'll be able
to select a channel by touching its fader.
Viewing the parameter values
The CHANNEL DISPLAY screen shows the parameter values that
you can operate in the CHANNEL EDIT section.
The arrangement of the parameters and the color of the knobs in the
CHANNEL DISPLAY screen is similar to the layout of the
CHANNEL EDIT section, making it easy for you to check the values.
1.
In the CHANNEL EDIT section, press [CH DISP].
The CHANNEL DISPLAY screen will appear.
fig.ScrChAux.eps
Even if you operate the knobs of the CHANNEL EDIT section
without accessing the CHANNEL DISPLAY screen, the value of
the currently-operated parameter is shown in the sub-display
area.
fig.SubDispPrm.eps
Attenuator adjustments
Use the PREAMP area of the CHANNEL EDIT section to adjust the
attenuator.
1.
Use the GAIN dial to adjust the attenuator.
fig.ChEdtPreamp.eps