Roland VS-1824 User Manual page 97

15
Press [FADER/MUTE] so that the TR (track) indicator is lit.
16
Hold down a [STATUS] button (of any track) and press
[CLEAR].
17
Select the track that you wish to record. Hold down [REC], and
press the [STATUS] button of the track that you wish to
record. For this example, hold down [REC] and press the track
1 [STATUS] button. [STATUS] will blink red.
18
Select the source that will be recorded on the track. Hold down
the [STATUS] button of the track that you wish to record, and
press the [SELECT] button of the input channel that you wish
to assign as the source. For this example, hold down the track 1
[STATUS] button, and press the input channel 8 [SELECT]
button so it begins to blink.
fig.4-18_80
19
Raise and lower channel fader 1, and verify that the volume
changes. The track channel fader is used for monitoring. It
does not affect the recording level. You can record even if no
sound is heard. Set the fader to a comfortable level for
listening.
20
As described in "Recording On a Track" (p. 40), record your
performance and listen to the result.
Using Effects
At this time, the sound of
input channel 8 will no
longer be output directly
from master out.
97