Adjusting The Input Sensitivity - Roland VS-1824 User Manual

Making a Multi-Track Recording

Adjusting the Input Sensitivity

fig.3-09
9, 10
1
Press [PLAY (DISPLAY)].
2
Hold down [SHIFT] and press [
section of the display is enclosed in a bold frame.
3
Press [F2 (LM In)]. If [F2] does not show "LM In," first press
[PAGE] so that "LM In" appears, and then press [F2 (LM In)].
Now the level meters will show the volume level of the input
source.
fig.3-10_80
4
Make sure that the lower left of the center line of the display
indicates "Pre." If it indicates "Pst," press [F4 ( PRE)]. The
volume levels before passing through the channel fader (Pre
Level) will be displayed.
38
6 5
3
8
7
] or [
4 1
2
] so that the center