Roland VS-1824 User Manual page 51

4
Press [F2 (Erase)]. If [F2] does not show "Erase," first press
[PAGE] so that "Erase" appears, and then press [F2 (Erase)].
5
Press [STATUS] for the track that you wish to erase. [STATUS]
will light red.
6
Use [ ] [
7
Use the TIME/VALUE dial to specify the starting time of the
area that you wish to erase.
8
Use [ ] [
9
Use the TIME/VALUE dial to specify the ending time of the
area that you wish to erase.
fig.3-20_80
10
Press [F4 (Exec)]. The Track Erase operation will be executed.
] [ ] [ ] to move the cursor to "START."
] [ ] [ ] to move the cursor to "END."
Making a Multi-Track Recording
You can press [
move the cursor from
"START" to "END."
About [F2 (NOW)] and
[F3 (JUMP)] buttons.
NOW:
You can set the present
time to the START or END
time. If you want to set the
present time at the
beginning time of a range
you want to delete, then
make sure the cursor is at
"START," and press
[F2 (NOW)].
JUMP:
You can shift the present
time to the time set for
START or END. To shift
the present time to the end
time of the range you want
to delete, make sure the
cursor is at "END," then
press [F3 (JUMP)].
] to
51