About The Screen; Contents Of The Screen; Returning To The Main Screen; Adjusting The Screen Contrast - Roland C-330 Owner's Manual

Before You Start Playing

About the screen

Immediately after you turn on the power, the following "main
screen" will appear.

Contents of the screen

1
2
3
4
1.
Memory bank number
This shows the currently used memory bank (p. 33).
Range
M01–M20
2.
Keyboard transposition status (Transpose)
Range (half a semitone)
-6–5
3.
Temperament
Available Settings
EQUAL, WERCK., KIRN.1, KIRN.3, VALLO., MEAN.D, MEAN.E, PYTHG., M.BACH
4.
Reference pitch (master tuning)
Available Settings
392: VERSAILLES, 415: BAROQUE, 440: MODERN (standard), 465: VENETIAN
You can also adjust this tuning within the range of the
reference pitch (p. 56).
5.
Expression pedal status
This indicates the keyboard(s) that are affected by the expression
pedal.
Indication Explanation
The expression pedal affects all keyboards (Manual–I,
I PII
Manual–II, and pedalboard)
IP The expression pedal affects Manual–I and the pedalboard
II The expression pedal affects Manual–II
Off The expression pedal will not affect any keyboard
6.
Volume of the expression pedal
This indicates the extent to which the expression pedal is depressed.
22

Returning to the main screen

1.
5
fig.boot.eps
6

Adjusting the screen contrast

1.
2.
3.
fig.boot.eps
4.
5.
In order to perform an operation such as changing the C-330's
settings, you'll need to start by returning to the main screen.
Press the [Value/Exit Menu] knob a number of times.
The main screen will appear.
The memory bank is shown in the main screen.
You can adjust the contrast of the C-330's screen.
From the main screen, press the [Select/Menu] knob.
Turn the [Select/Menu] knob to select "6 Console."
Press the [Select/Menu] knob.
The Console screen will appear.
Turn the [Select/Menu] knob to select "Display Contrast."
Turn the [Value/Exit Menu] knob to adjust the
brightness.
Range
0–30
Press the [Value/Exit Menu] knob twice to return to the main screen.