Saving Performance Settings (Registrations); What Is A Registration; Recalling A Registration; Saving Current Settings Into A Registration - Roland FP-90 Owner's Manual

˙

Saving Performance Settings (Registrations)

What Is a Registration?

Tone settings and performance settings such as Dual Play or Split
Play can be saved as a "registration" and recalled whenever you like.
The FP-90 has six registration buttons ([1]–[6]), and you can save five
different registrations under each button. This means that you can
save as many as 30 registrations.
An entire group of 30 registrations is called a "Registration Set. "
5
4
Variation
3
2
1
1-5 2-5
1-1 2-1 3-1
30 registrations
Registration set
MEMO
5 For more about the settings saved in a registration, refer to
"Settings Saved in Registrations" (p. 26).
5 You can save registration sets to a USB flash drive (sold
separately; p. 16).

Recalling a Registration

Here's how to recall settings that you've saved in a registration.
2
1
Press the [Registration] button.
The first time you press the [Registration] button after turning on the
power, a screen like the following will appear.
2
Press a number button ([1] to [6]) to choose the location
where the desired registration is saved.
3
Press the [–] [+] buttons to select the registration variation.
The settings change accordingly.
MEMO
5 You can also use a pedal to recall registrations (p. 20).
5 You can reload registration sets that you've saved to a USB
flash drive (p. 16).
4
Press the [Exit] button.
3-5 4-5 5-5 6-5
4-1 5-1 6-1
1 3

Saving Current Settings into a Registration

Here's how to save the performance settings to a registration.
NOTE
When you save a registration into a location, it will overwrite any
registration already stored at that location.
2
1
Make the desired performance settings.
2
Hold down the [REGISTRATION] button and press one of
the [1]–[6] buttons, then press the [-] [+] buttons to which
you want to assign the settings.
When you release the [REGISTRATION] button, you will see a screen
like the one shown below.
3
Rename the registration.
Button Operation
[K] [J] buttons Select the character to change.
[-] [+] buttons
Change the character.
If you decide to cancel, press the [Exit] (Cancel) button.
4
Press the [Function] (Store) button.
The performance settings are saved.
The [Registration] button stops blinking and lights up solid.
NOTE
Do NOT turn off the power while "Executing... " is displayed.
5
Press the [Exit] button.
MEMO
You can reset all registrations to their factory defaults. For details,
refer to "Restoring the Factory Settings (Factory Reset)" (p. 17).
Advanced Operation
2 2
15