Roland C-330 Owner's Manual page 39

4.
Press the [PLAY/PAUSE] piston to play back the song data.
The song data will begin playing.
You can change the tempo (Tempo) of the playback.
Turn the [Select/Menu] knob to select "Tempo," and use the [Value/EXIT MENU] knob to change the value.
If you want to change the playback tempo, play the song to load it into the C-330, and then change the tempo.
You can pause the playback.
Press the [PLAY/PAUSE] piston. Playback will resume from the same location when you press the [PLAY/PAUSE] piston once
again.
You can also play back songs in succession.
Turn the [Select/Menu] knob to select "Play Mode," and use the [Value/EXIT MENU] knob to change the setting.
Setting
OFF
CHAIN
5.
To stop playback, press the [STOP] piston.
If a screen like the following appears
If internal memory contains unsaved song data, the following message will appear when you attempt to select a saved song.
fig.08-23
If you want to delete your unsaved song
1.
Press the [SET] piston.
The song data will be deleted.
2.
Proceed from step 3 (p. 40).
If you don't want to delete your unsaved song
1.
Press the [Value/Exit Menu] knob to cancel the save operation and return to the previous screen.
Save your song data (p. 37).
Explanation
Play back only the selected song
Consecutively play back all the songs on the selected media
Recording and Playing Back Your Performances
41