Commands Without Data Transfer - Fujitsu MHU2100AT Product Manual

5.4.3 Commands without data transfer

Execution of the following commands does not involve data transfer between the
host and the device.
•
RECABLIBRATE
•
READY VERIFY SECTOR(S) (EXT)
•
SEEK
•
EXECUTE DEVICE DIAGNOSTIC
•
INITIALIZE DEVICE PARAMETERS
•
STANDBY IMMEDIATE
•
IDLE IMMEDIATE
•
STANDBY
•
IDLE
•
CHECK POWER MODE
•
SLEEP
•
SMART ENABLE/DISABLE AUTOSAVE
•
SMART EXECUTE OFFLINE IMMEDIATE
•
SMART ENABLE OPERATION
•
SMART DISABLE OPERATION
•
SMART RETURN STATUS
•
DEVICE CONFIGURATION RESTORE
•
DEVICE CONFIGURAION FREEZE LOCK
•
SET MULTIPLE MODE
•
FLUSH CACHE (EXT)
•
SET FEATURES
•
SECURITY ERASE PREPARE
•
SECURITY FREEZE LOCK
•
READ NATIVE MAX ADDRESS (EXT)
•
SET MAX ADDRESS (EXT)
Figure 5.6 shows the protocol for the command execution without data transfer.
C141-E202-01EN
5.4 Command Protocol
5-131