Framing And Clearances; Selecting Appliance Location - Heat & Glo Cyclone-BC Owner's Manual

3 3

Framing and Clearances

Note:
• Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
A. Selecting Appliance Location
When selecting a location for your appliance it is important to
consider the required clearances to walls (see fi gure 3.1).
A
1/2 IN.
Figure 3.1 Appliance Locations
C
E
In addition to these framing dimensions, also reference the following sections:
• Clearances and Mantel Projections (Sections 3.C and 3.D)
• Vent Clearances and Framing (Section 6).
1/2 IN.
Model
Inches
Cyclone
Millimeters
Heat & Glo • Cyclone-BN, Cyclone-BC • 2073-900 Rev. N • 10/08
Note: For actual appliance dimensions refer to Sec-
tion 16.
B
E
B
D
A B C
31-1/8 28-5/8 44
791 728 1118
WARNING
Fire Risk
Provide adequate clearance:
• Around air openings
• To combustibles
• For service access
Locate appliance away from traffi c areas.
B
A
D E
16-3/8 12
416 305
7