Assign An Ethernet Address Via Dhcp - Barco DP2K Series User Manual

5. Installation
Image 5-1
Assign a hostname
5.1.4

Assign an Ethernet address via DHCP

How to set up
1. While in Communication, tip Edit (1) button under Projector IP address. (image 5-2)
The Edit the Barco IP address window opens (2).
2. Check the check box next to Obtain an IP address automatically (DHCP) (3).
This selection will become active. Other selections are grayed out.
3. Tip on Apply to activate (4).
120 R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012