1. Introduction
Note, gives extra information about the described subject.
Tip, gives extra advice about the described subject.
Images given in the manual are used as illustration. The content of the image can be slightly different with
the real image on the screen, e.g. version numbers, projector name, installed modules, etc. .
Typography:
•
Menu items to tip on or buttons are indicated in bold, e.g. OK
•
Menu items are indicated in italic.
•
A dialog window is indicated in italic, e.g. Make a new configuration.
•
Step related notes, tips, warnings or cautions are printed in italic.
•
Procedure related notes, tips, warnings or cautions are printed in bold between 2 lines preceding by
the corresponding icon.
•
Image related indication which are repeated in the image and in a step are indicated between brackets,
e.g. (1).
1.3
About the start up
Start up cycle
During the start up, the touch panel tries to make an IP connection with the projector.
When this is successful, the application becomes available.
When it fails, the touch panel tries to make a serial connection. When it is successful, the application
becomes available.
When it fails, the loop starts again by trying to make a IP connection, etc. It continues again and again.
1.4
About the touch panel display
Introduction
Once the touch panel is physically connected to the projector and a connection is established, the projector
dependent control software is loaded.
The panel starts always with the default user.
8
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012