Table of Contents
Advertisement
5.1.2
Get overview current Ethernet addresses
How to get an overview
1. First tip Installation and then Communication.
An overview of the current IP addresses (projector and cinema IP address) is displayed.
5.1.3
Hostname of projector used as projector name
Use as Projector name
The hostname of the projector is also used as projector name in the title of the touch panel window.
An empty hostname is not allowed.
Restrictions for the hostname
•
Valid characters are a to z, A to Z, 0 to 9 and dash.
•
First character can be a letter or a digit.
•
Starting or ending with a dash is not allowed.
•
Hostname with all digits is not allowed.
•
Maximum 32 characters.
How to set up
1. While in Communication, tip Edit (1) button under Projector IP address. (image 5-1)
The Edit the Barco IP address window opens (2).
2. Tip in the hostname input field and enter the desired name (3).
3. Tip on Apply to activate (4).
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
5. Installation
119
Advertisement
Table of Contents
