Table of Contents
Advertisement
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
62
DS8000 User's Guide
3) The WS Help System (part of the DS Storage Manager Server) window
is stopped, if it was not stopped before by the Embedded IBM
WebSphere Application Server.
b. If one or both of the servers are not installed or have to be upgraded on
your system, they are installed or upgraded in the following order (the
progress of the installation is indicated on the associated progress
window):
1) DS Storage Manager Server Installation Progress window
2) DS Network Interface Server Installation Progress window
Note: You can click Cancel (not recommended) during the DS Network
Interface Server installation process. The process does not stop
immediately when the Cancel button is clicked. Rather, the process
continues to install all the files that are associated with this part of
the installation. These files remain installed and are not reinstalled
upon reactivation of the installation process.
A confirmation message is displayed that asks you to confirm that
you want to cancel the installation.
c. The Components Installation Progress (displaying the installation or
upgrade progress of the DS Storage Manager product applications) is
displayed after the servers have been installed or upgraded.
Note: You can click Cancel (not recommended) during the components
installation process. The installation process stops immediately
when the Cancel button is clicked. A window with a confirmation
message is displayed. For a new installation, when you confirm that
you want to leave, all the files that have been copied up to the point
that the Cancel button was clicked are uninstalled. You then are
exited from the installation process.
When this part of the installation is completed, the system starts both servers:
first the DS Network Interface Server and then the DS Storage Manager
Server. Wait for the servers to be started before going to the next step. When
the servers have been started, the Installer Finish window is displayed.
20. Click Finish to exit the installation process. When the installation wizard exits,
a file (postinstallation.txt) is displayed, containing the postinstallation tasks.
Follow the instructions in the postinstallation text file to complete the
postinstallation tasks. If the installation failed, you must exit the installation
process and check the install log for error messages.
Advertisement
Table of Contents
