Table of Contents
Advertisement
Chapter 1. Introduction to IBM TotalStorage DS8000 series
IBM TotalStorage DS8000 is a high-performance, high-capacity series of disk
storage that is designed to support continuous operations. DS8000 series models
(machine type 2107) use the IBM POWER5
with the IBM Virtualization Engine
storage unit and one or two management consoles, two being the recommended
configuration. The graphical user interface (GUI) or the command-line interface
(CLI) allows you to logically partition storage and use the built-in Copy Services
functions. For high-availability, hardware components are redundant.
You can read the following information to familiarize yourself with the DS8000
series:
v DS8000 series models, including a model comparison chart
v DS8000 series performance features
v DS8000 series interfaces
v DS8000 series hardware specifics
v Supported systems for open systems, S/390
v Data management elements
v Copy Services
v Data migration
DS8000 models
The DS8000 series offers various choices of base and expansion models, so you
can configure storage units that meet your performance and configuration needs.
DS8100
DS8300
The DS8000 expansion frames (Models 92E and 9AE) expand the capabilities of
the base models. You can attach the Model 92E to either the Model 921 or the
Model 922 to expand their capabilities. You can attach the Model 9AE to expand
the Model 9A2.
Figure 1 on page 2 provides a high-level view at the components for the DS8100
and DS8300 base models (Models 921, 922, and 9A2).
© Copyright IBM Corp. 2004, 2005
The DS8100 (Model 921) features a dual two-way processor complex and
support for one expansion frame.
The DS8300 (Models 922 and 9A2) features a dual four-way processor
complex and support for one or two expansion frames. The Model 9A2
supports two IBM TotalStorage System LPARs (Logical Partitions) in one
storage unit.
™
server technology that is integrated
™
technology. DS8000 series models consist of a
®
, and zSeries
®
hosts
1
Advertisement
Table of Contents
