Installing Or Replacing The Optical Drive - Lenovo 2119 Maintenance Manual
Machine types: 2119, 2121, 2697, 2698, 2742, 2750, 2756, 2800, 2929, 2932, 2934, 2935, 2941, 2943, 2945, 2960, 2961, 2967, 2982, 2986, 2988, 2992, 2993, 2994, 2996, 2999, 3181, 3182, 3183, 3184, 3185, 3186, 3187, 3190, 3198, 3201, 3202, 3204, 3207, 3208,
Hide thumbs
Also See for 2119:
- Hardware maintenance manual (282 pages) ,
- User manual (152 pages) ,
- Hardware maintenance manual (282 pages)
Table of Contents
Advertisement
• If you are installing a memory module, open the retaining clips of the memory slot into which you
want to install the memory module.
Figure 23. Opening the retaining clips
7. Position the new memory module over the memory slot. Ensure that the notch
module aligns correctly with the slot key
down into the slot until the retaining clips close.
Figure 24. Installing a memory module
8. Reinstall the PCI Express x16 graphics card if you have removed it.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 150.
Installing or replacing the optical drive
Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
on page 1.
This section provides instructions on how to install or replace the optical drive.
To install or replace an optical drive, do the following:
100
ThinkCentre Hardware Maintenance Manual
2
on the system board. Push the memory module straight
1
on the memory
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
