Lenovo 2119 Maintenance Manual page 121
Machine types: 2119, 2121, 2697, 2698, 2742, 2750, 2756, 2800, 2929, 2932, 2934, 2935, 2941, 2943, 2945, 2960, 2961, 2967, 2982, 2986, 2988, 2992, 2993, 2994, 2996, 2999, 3181, 3182, 3183, 3184, 3185, 3186, 3187, 3190, 3198, 3201, 3202, 3204, 3207, 3208,
Hide thumbs
Also See for 2119:
- Hardware maintenance manual (282 pages) ,
- User manual (152 pages) ,
- Hardware maintenance manual (282 pages)
Table of Contents
Advertisement
Figure 43. Removing the eight screws that secure the system board
10. Slide the system board to the front of the computer and then carefully pivot the failing system board
upward to remove it out of the chassis.
11. Remove the microprocessor from the failing system board and install it on the new system board. See
"Replacing the microprocessor" on page 111.
12. Install the new system board into the chassis by aligning the eight mounting studs in the chassis with
the corresponding holes in the new system board. Then, install the eight screws to secure the system
board by following the sequence shown in the following illustration.
.
Chapter 9
Replacing FRUs (machine types: 2697, 2698, 2742, 2750, 2935, 2943, 2960, 2967, 2986, 2992, 2994, 2999, 3182,
3184, 3186, 3190, 3201, 3204, 3208, 3212, 3217, 3220, 3226, 3228, 3302, 3391, and 3392)
115
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
