Replacing The Microprocessor - Lenovo 2119 Maintenance Manual
Machine types: 2119, 2121, 2697, 2698, 2742, 2750, 2756, 2800, 2929, 2932, 2934, 2935, 2941, 2943, 2945, 2960, 2961, 2967, 2982, 2986, 2988, 2992, 2993, 2994, 2996, 2999, 3181, 3182, 3183, 3184, 3185, 3186, 3187, 3190, 3198, 3201, 3202, 3204, 3207, 3208,
Hide thumbs
Also See for 2119:
- Hardware maintenance manual (282 pages) ,
- User manual (152 pages) ,
- Hardware maintenance manual (282 pages)
Table of Contents
Advertisement
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 262.
Replacing the microprocessor
Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
on page 1.
This section provides instructions on how to replace the microprocessor.
CAUTION:
The heat sink and microprocessor might be very hot. Turn off the computer and wait three to five
minutes to let the computer cool before removing the computer cover.
To replace the microprocessor, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 217.
3. Remove the heat sink. See "Replacing the heat sink" on page 239.
Note: Place the heat sink on its side so that the thermal grease on the bottom of it does not get in
contact with anything.
4. Lift the small handle
Figure 201. Accessing the microprocessor
242
ThinkCentre Hardware Maintenance Manual
1
and open the retainer
2
to access the microprocessor
3
.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
