Lenovo 2119 Maintenance Manual page 173
Machine types: 2119, 2121, 2697, 2698, 2742, 2750, 2756, 2800, 2929, 2932, 2934, 2935, 2941, 2943, 2945, 2960, 2961, 2967, 2982, 2986, 2988, 2992, 2993, 2994, 2996, 2999, 3181, 3182, 3183, 3184, 3185, 3186, 3187, 3190, 3198, 3201, 3202, 3204, 3207, 3208,
Hide thumbs
Also See for 2119:
- Hardware maintenance manual (282 pages) ,
- User manual (152 pages) ,
- Hardware maintenance manual (282 pages)
Table of Contents
Advertisement
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Open the computer cover. See "Opening the computer cover" on page 154.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 154.
4. Locate the mSATA solid state drive bay. See "Locating internal drives" on page 86.
Note: You might have to remove the metal cover of the mSATA solid state drive bay.
5. Insert the mSATA solid state drive into the mini PCI Express slot on the storage converter, and then
press the mSATA solid state drive downward.
Figure 104. Installing the mSATA solid state drive into the storage converter
6. Install the two screws to secure the mSATA solid state drive to the storage converter.
Figure 105. Installing the screws that secure the mSATA solid state drive
7. Insert the mSATA solid state drive storage converter into the chassis. Then push the storage converter
to the left to align the screw hole in the storage converter with the corresponding hole in the chassis.
.
Chapter 10
Replacing FRUs (machine types: 2756, 2800, 2929, 2932, 2934, 2941, 2945, 2961, 2982, 2988, 2993, 2996, 3181,
3183, 3185, 3187, 3198, 3202, 3207, 3209, 3214, 3218, 3224, 3227, 3306, 3393, and 3395)
167
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
