Connector
DisplayPort connector
Ethernet connector
Microphone connector
PS/2 keyboard connector
(optional)
PS/2 mouse connector
(optional)
Serial port
USB 2.0 connector
USB 3.0 connector
VGA monitor connector
Locating major FRUs and CRUs
Figure 3 "Component locations" on page 74 shows the locations of the various components in your
computer. To remove the computer cover, see "Removing the computer cover" on page 217.
Used to attach a high-performance monitor, a direct-drive monitor, or other devices
that use a DisplayPort connector.
Used to attach an Ethernet cable for a local area network (LAN).
Note: To operate the computer within FCC Class B limits, use a Category 5 Ethernet
cable.
Used to attach a microphone to your computer when you want to record sound or if
you use speech-recognition software.
Used to attach a keyboard that uses a PS/2 keyboard connector.
Used to attach a mouse, a trackball, or other pointing devices that use a PS/2
mouse connector.
Used to attach an external modem, a serial printer, or other devices that use a
9-pin serial port.
Used to attach a device that requires a USB 2.0 connector, such as a USB
keyboard, a USB mouse, a USB scanner, or a USB printer. If you have more than
eight USB devices, you can purchase a USB hub, which you can use to connect
additional USB devices.
Used to attach a device that requires a USB 2.0 or 3.0 connector, such as a USB
keyboard, a USB mouse, a USB scanner, or a USB printer. If you have more than
eight USB devices, you can purchase a USB hub, which you can use to connect
additional USB devices.
Used to attach a VGA monitor or other devices that use a VGA monitor connector.
Description
Chapter 8
73
.
Locations