Lenovo 2119 Maintenance Manual page 127
Machine types: 2119, 2121, 2697, 2698, 2742, 2750, 2756, 2800, 2929, 2932, 2934, 2935, 2941, 2943, 2945, 2960, 2961, 2967, 2982, 2986, 2988, 2992, 2993, 2994, 2996, 2999, 3181, 3182, 3183, 3184, 3185, 3186, 3187, 3190, 3198, 3201, 3202, 3204, 3207, 3208,
Hide thumbs
Also See for 2119:
- Hardware maintenance manual (282 pages) ,
- User manual (152 pages) ,
- Hardware maintenance manual (282 pages)
Table of Contents
Advertisement
Replacing the mSATA solid state drive
To replace the mSATA solid state drive, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 94.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 95.
4. Locate the card reader. See "Locating major FRUs and CRUs" on page 73.
5. Disconnect the signal cable and power cable from the mSATA solid state drive.
6. Press the blue retaining clip to remove the mSATA solid state drive storage converter out of the chassis.
Figure 51. Removing the mSATA solid state drive storage converter
.
Chapter 9
Replacing FRUs (machine types: 2697, 2698, 2742, 2750, 2935, 2943, 2960, 2967, 2986, 2992, 2994, 2999, 3182,
3184, 3186, 3190, 3201, 3204, 3208, 3212, 3217, 3220, 3226, 3228, 3302, 3391, and 3392)
121
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
