Call Transfer; About Call Transfer; Blind Call Transfer; Consultative Call Transfer - Cisco TANDBERG?150MXP User Manual

Call Transfer
About Call Transfer
You may transfer an ongoing call to somebody
else in a way similar to what you can do on most
corporate telephone systems.
Basically, there are two transfer modes; Blind
Consultative
and :
•
Blind
takes place when you receive a call
and decides to transfer this call to another
person without speaking to that person.
In other words, you assume that the other
person is present and ready to receive the
call.
•
Consultative
takes place when you put the
person you are talking to on hold, then call
another person, talk to that person and
finally decide to transfer the call to that
person.
Alternatively, you may, of course, receive a
second call whilst you are in a already. This
will, however, impose no change to the above
principles.
Table of Unpacking & Operating
Contents Installation Principles
D 14067.02
02.2010

Whilst in a call, press OK to produce the soft
keys, if applicable.

OK
Whilst in a call press to produce the soft
keys, if applicable, and set the current call
on hold as described on the previous page.
Making
Making
Video Calls Using
Phone Book
Calls
Blind Call Transfer

Press Transfer to initiate the transfer
process.
Consultative Call Transfer

Call the other person, to whom the call is to
be transferred.
Making
Phone Book Incoming
Telephone
Details Calls
Calls
26

Call the person to whom the call is to be
transferred in the usual way, either by
dialling directly or by using the phone book.
Once you launch the call, transfer becomes
effective.

After you have talked to this person, press
the Transfer key, and the two parties will be
connected, while you are disconnected.
Calling More Calling More Video Meeting Contact
Than One Than One Features Information
TANDBERG 150 MXP
TANDBERG 150 MXP
USER GUIDE
USER GUIDE