Working With Pedals; Changing Pedal Settings - DigiTech iPB-10 Owner's Manual

Working With Pedals

Working With Pedals

Changing Pedal Settings

1. If the Pedalboard window is not already active, select
it by touching the Pedalboard icon.
2. Touch the Expansion bar to expand the view and show
all pedals.
3. Place your finger on the knob you want to modify and
drag it up to increase the value or down to decrease
the value. A pop over display will appear providing
instant feedback as the setting is changed. Once the
desired value is reached, lift your finger from the
window. The setting will remain changed at this point.
Tapping twice on any effect pedal will zoom in on the
HINT:
pedal, making it even easier to adjust the effect parameters.
Tap anywhere, other than on a knob or switch, to exit zoom
view.
Tapping on the footswitch for each pedal allows you
HINT:
to bypass and engage the pedal (the LED will light when
the pedal is engaged).
1.
2.
3.
27