Configuring The Standard Tcp/Ip Port; Printer Driver Not Yet Installed; Printer Driver Already Installed - Brother MFC-7840N Network User's Manual

Configuring the standard TCP/IP port

Printer driver not yet installed

a
Put the supplied CD-ROM into your CD-ROM drive. If the model name screen appears, choose your
machine. If the language screen appears, choose your language.
b
The CD-ROM main menu will appear. Click Install Other Drivers or Utilities.
c
Click Printer Driver (Only, for Network).
d
Click Next in response to the Welcome message. Follow the on-screen instructions.
e
Choose Standard Installation and click Next.
f
Choose Brother Peer-to-Peer Network Printer, and then click Next.
g
Follow the on-screen instruction, and then click OK.
Note
Contact your administrator if you are not sure about the location and name of the printer on the network.
h
Continue through the wizard clicking Finish when complete.

Printer driver already installed

If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
a
For Windows Vista
Click the Start button, Control Panel, Hardware and Sound, and then Printers.
®
For Windows XP and Windows Server
Click the Start button and choose Printers and Faxes windows.
®
For Windows 2000.
Click the Start button and choose Settings and then Printers.
b
Right click on the printer driver you wish to configure, and then choose Properties.
c
Click the Ports tab and click Add Port.
d
Choose the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the
New Port... button.
e
The Standard TCP/IP Port Wizard will start.
f
Enter the IP address of your network printer. Click Next.
g
Click Finish.
h
Close Printer Ports and Properties dialog box.
®
:
®
2003:
Network printing from Windows
®
: basic TCP/IP Peer-to-Peer printing
5
5
5
5
35