Table of Contents
Advertisement
If you don't follow the above steps to remove the device, the Unsafe Removal
of Device message (in Windows 2000) will appear:
Driver Installation for Mac OS 8.6 and Mac OS 9.X
1.
Insert the Driver CD into the CD-ROM drive and drag folder McRW_b
(under folder Mac on the Driver CD) to the desktop.
2.
Run Installer program under folder McRW_b on the desktop.
3.
Restart the computer to complete the installation process.
Driver Installation for Mac OS X 10.1.2
The Transcend 6-in-1 Card Reader/Writer is a driver-free device for Mac OS X
10.1.2. You can connect it to an available USB port via the USB extension cable
and don't have to install a special driver. Mac OS X 10.1.2 will detect the device
and install all the associated files required for its use automatically.
How to Use the 6-in-1 Card Reader/Writer with Mac OS
1.
Connect the ends of the USB extension cable into the 6-in-1 Card
Reader/Writer and an available USB port of your computer.
2.
Insert a storage card into the 6-in-1 Card Reader/Writer. A disk icon will
appear on the desktop. You can then use the storage card as if it were a
Mac HardDisk.
7
Advertisement
Table of Contents
