Driver Installation For Mac ™ Os 9.X; Driver Installation For Mac ™ Os 10.1.2, Or Later; Driver Installation For Linux™ Kernel 2.4, Or Later - Transcend Portable Multi-Card Reader User Manual

Driver Installation for Mac
1.
Put the Driver CD into the CD-ROM drive and run the Install program located in the Mac folder on the
Driver CD. Follow the on-screen instructions to complete the driver installation.
2.
Plug the Multi-Card Reader into an available USB port.
3.
Insert a memory card into the Multi-Card Reader. A disk icon will appear on the desktop. After the icon
appears you can use the memory card as if it were a Hard Disk on your Mac
Driver Installation for Mac
No drivers are required. Plug your Multi-Card Reader into an available USB port and your computer will
automatically detect it.
Driver Installation for Linux™ Kernel 2.4, or Later
No drivers are required. Plug your Multi-Card Reader into a USB port and mount it.
1.
First create a directory for the CardReader
Example: mkdir /mnt/CardReader
2.
Then, mount the CardReader:
Example: mount –a –t msdos /dev/sda1 /mnt/CardReader
NEVER Remove a Flash Memory Card from the Multi-Card Reader without first
Unmounting the device.
™
OS 9.x
Figure 5. Mac Driver Installation
™
OS 10.1.2, or Later
Figure 6. Mac Driver Installation
5
™
.