Table of Contents
Advertisement
Driver Installation for Windows
1.
There is no need to install the driver for normal usage.
Driver Installation for Mac™ OS 9.x
1.
Power on the Mac™ you will be connecting the Compact Card Reader to, and
make sure the USB port is enabled and working properly.
Do NOT plug your Compact Card Reader into the USB port at this time.
2.
Insert the Driver CD into the CD-ROM drive and run the Install program in the
Mac Driver folder on the Driver CD. Follow the on-screen instructions to com-
plete the driver installation.
3.
Restart the computer to complete the driver installation process.
Driver Installation for Mac™ OS X or Later
1.
Transcend's Compact Card Reader does not require a device driver for the
Mac OS X or later operating system.
2.
Connect the Compact Card Reader to an available USB port directly.
3.
You can then use the memory card as if it were a Hard Disk on your Mac™
Using the Compact Card Reader
®
Windows
98/98SE and 2000 Setup
1. Complete the driver installation.
2. Connect the Compact Card Reader to an available USB port directly.
3. Your computer automatically recognizes the Compact Card Reader and displays
a "New Hardware Found" message. Windows will install the files needed to use
your device.
4. One Removable Disk drives with Card Slot Identification Icons will appear in
My Computer.
®
ME and XP
4
Advertisement
Table of Contents
