Installation - Husqvarna Automower 320 Operator's Manual

Cutting time
If the mowing results are not optimal when using the
Weather timer, Cutting time settings may need adjusting.
To adjust the Cutting time: place the cursor by Cutting
time and use the right and left arrow keys to increase or
decrease the cutting time in three preset intervals.
The longer cutting time that is chosen, the longer the
robotic lawnmower will be allowed to work.

6.8 Installation

This menu function is used to steer the robotic lawnmower
to remote parts of a working area and control how the
robotic lawnmower searches for the charging station. For
many working areas there is no need to alter the factory
settings i.e. allow the robotic lawnmower itself to combine
the various search methods and the underlying settings.
Finding the charging station
The robotic lawnmower can be set to search for the
charging station in one or more of the following three
ways: Guide, Boundary loop and Charging station. The
factory settings are that these three search options are
automatically combined to find the charging station as
quickly as possible but also with a minimum risk of tracks
forming.
In very complex gardens e.g. with many areas joined by
narrow passages, the amount of time required to find the
charging station is decreased by carrying out a number
of the manual setting outlined below.
The robotic lawnmower always starts the search for the
charging station using an irregular search method.
When the robotic lawnmower still cannot find the charging
station after a specific period of irregular searching, it also
starts to search for the guide wires and after a further
period also the boundary wire to follow one of them into
the charging station instead. This time is specified in
minutes and is known as delay time.
Example:
4 minute delay for Guide 1 and Guide 2 and
11 minutes for the boundary loop. The robotic
lawnmower then searches irregularly for 4 minutes
and then searches for the guide wires for 7 minutes.
If it has not found a guide wire after this period,
the robotic lawnmower now also searches for the
boundary loop.
It is possible of course to specify the same delay time
for both the guide wires and boundary loop, for instance
5 minutes. The robotic lawnmower then searches
irregularly for 5 minutes and when it does not find the
charging station, it continues to search either by following
the guide wires or the boundary loop, depending on which
one it reaches first.
MENU FUNCTIONS
Search
method
Corridor
width
Installation
Find charging
Lawn
station
coverage
Overview Reset
Area 1-5 GPS Overview
Exit Reversing Drive past
angles distance
=Delay time
=Search mode
Boundary wire
Guide 2
Guide 1
Random
4 min
Advanced
Reset
Installation
Automatic
wire shape
passage
handling
11 min
3012-1089
English - 49