Presentation - Husqvarna Automower 320 Operator's Manual

2 Presentation

This chapter contains information that is important to be
aware of when planning the installation.
Installing a Husqvarna robotic lawnmower involves four
main components:
• A robotic lawnmower that mows the lawn by essentially
operating in a random pattern. The robotic lawnmower
is powered by a maintenance-free battery.
• A charging station, to where the robotic lawnmower
automatically returns when the charge level in the
battery becomes too low.
The charging station has three functions:
• To send control signals along the boundary wire.
• To send control signals along the guide wire so
that the robotic lawnmower can find the charging
station.
• To charge the battery in the robotic lawnmower.
• A transformer, which is connected between the
charging station and a 110V-230V wall socket. The
transformer is connected to the wall socket and to
the charging station using a 10 m long low voltage
cable. The low voltage cable must not be shortened
or extended.
A longer low voltage cable is available as optional
accessory. Please contact your dealer for more
information.
• A loop wire, laid in a loop around the robotic
lawnmower's working area. The loop wire is laid
around the edges of the lawn and around objects and
plants that the robotic lawnmower must not run into.
The loop wire is also used as the guide wire.
The wire supplied for the installation is 400 m long
(250 m for Automower® 320). If this is not sufficient,
more wire can be purchased and spliced onto the
existing wire with a coupler.
The maximum permitted length for the boundary loop
is 800 m.
PRESENTATION
3012-1040
3012-1041
3012-1214
3012-221
English - 9