Husqvarna Automower 320 Operator's Manual page 60

Drive past wire
The front of the robotic lawnmower always passes the
boundary wire by a specific distance before the mower
turns around. The default distance is 31 cm, but this can
be changed if required. A figure between 20 and 50 can
be selected.
Note that the distance given is only an approximate value
and should be regarded as a guide. In reality, the actual
distance the robotic mower passes the boundary wire can
vary.
Specify the number of centimetres you want the robotic
lawnmower to pass the boundary wire and press OK.
Installation shape
The robotic lawnmower can be set for one of three garden
shapes: Open, Normal and Complex.
This setting affects how the robotic lawnmower covers
a working area when it mows.
• Open
Suitable in a working area consisting of a large
open lawn area with few obstacles and no
passages or when the mowing result is uneven
in steep slopes.
• Normal
Suitable for most working areas. Designed
for working areas with a moderate number of
obstacles and/or passages.
• Complex
Suitable in working areas with many obstacles
and/or passages.
Automatic passage handling
Automatic passage handling means that the mower
itself regulates the distance (corridor width) from which
it follows the guide wires. If Automatic passage handling
is deactivated, the corridor width settings must be done
manually to let the robotic lawnmower get through all the
passages in the garden.
The factory setting is that Automatic passage handling is
enabled.
English - 58
MENU FUNCTIONS
3012-1254
3012-1255
3012-568