When The Oven Is First Installed - Zanussi ZOB 590 User Manual

When the oven is first installed

Remove all packaging, both inside and
outside the oven, before using the oven.
When the oven is first connected to the electrical supply,
the display will automatically show 12:00 and the symbol
will flash. Ensure the correct time of day is set
before using the oven.
To set the correct time of day:
a) while the symbol
of day by pressing buttons "
The time arrow symbol
after the correct time is displayed (Fig. 2).
b) if the symbol is not flashing anymore, press button
twice (Fig. 3).
Then, proceed as described in point a).
Before first use
Before using for the first time, the oven should be heated up
without food.
To do that, proceed as follows:
— press button to switch on the oven.
— press button
"Conventional Cooking" function
— set the temperature to 250 °C using the increasing
push button " ".
— Allow the oven to run empty for approximately 45
minutes.
— open a window for ventilation.
This procedure should be repeated with the "Fan
Cooking" and "Full Grill"
approximately 5-10 minutes.
During this time, an unpleasant odour may be
emitted. This is absolutely normal, and is
caused by residues of manufacturing.
Once this operation is carried out, let the oven
cool down, then clean the oven cavity with a
soft cloth soaked in warm water to which a little
mild washing-up liquid has been added.
Before cooking for the first time, carefully wash
the shelves and the baking tray.
28
is flashing , set the correct time
" or " " (Fig. 1).
will disappear about 5 seconds
twice and select the
(Fig. 4).
function for
Fig. 1
Fig. 2
Fig. 3
Fig. 4