How To Select A Cooking Function; Safety Thermostat - Zanussi ZOB 590 User Manual

"On/Off" Push Button
The oven must be switched on before setting any cooking
function or programme. When button
oven symbol will appear in the display, and the oven light
will switch on.
To switch off the oven, you can press button
time. Any cooking function or programme will stop, the
oven light will switch off and the time display will show the
time of day only.
It is possible to switch off the oven at any time.

How to select a Cooking Function

1) Switch on the oven by pressing the
2) Press button to select the required oven function.
Each time button is pressed, a cooking symbol will
appear in the display and the corresponding cooking function
number will appear to the left of the currently selected
cooking function symbol (Fig. 5).
3) If the pre-set temperature is not suitable, press button
" " or " " to adjust the temperature in 5 degree steps.
- as soon as the oven heats up, the thermometer symbol
rises slowly , indicating the degree to which the oven is
currently heated.
When the required temperature is reached, an acoustic
alarm will sound for a short time and the thermometer
symbol will illuminate permanently.
How to set the temperature and cooking time
Press button " " and " " to increase or decrease the
pre-set temperature while the "°" symbol is flashing (Fig.
6). The maximum temperature is 250°C.
Press button " " and " " to increase or decrease the pre-
set cooking time while the symbol

Safety Thermostat

To prevent dangerous overheating (through incorrect use of
the appliance or defective components), the oven is fitted
with a safety thermostat, which interrupts the power supply.
The oven switches back on again automatically, when the
temperature drops.
Should the safety thermostat trigger due to incorrect use of
the appliance, it is enough to remedy the error after the oven
has cooled down; if on the other hand, the thermostat triggers
because of a defective component, please contact Customer
Service.
is pressed, the
at any
button.
is flashing (Fig. 6).
Fig. 5
Fig. 6
29