Instructions For Building In - Zanussi ZOB 590 User Manual

Instructions for building In

For problem-free functioning of the built-in appliance,
the kitchen unit or the recess into which the appliance
is built must have suitable dimensions.
In accordance with the regulations in force, all parts
which ensure the shock protection of live and insulated
parts must be fastened in such a way that they cannot
be undone without tools.
These also include the fixing of any end walls at the
beginning or end of a line of built-in units.
The shock protection must in any case be ensured by
the building in of the appliance.
The appliance can be placed with its back or a side
wall against higher kitchen units, appliances or walls.
However, only other appliances or units of the same
height as the appliance can be placed against the other
side wall.
Oven dimensions (Fig. 27)
Instructions for Building In
For problem-free functioning of the built-in appliance,
the kitchen unit or the recess into which the appliance
is built must have suitable dimensions (Fig. 28-29).
Securing the Appliance to the Cabinet
1. Open the oven door.
2. Fasten the oven to the cabinet placing the four
distance holders provided with the appliance (Fig.
30 - A) which fit exactly into the holes in the frame
and then fit four wood screws (Fig. 30 - B).
When installing a hob over the oven, the hob
electrical connection and the oven one have to be
carried out separately for security reasons and to
let the oven be taken off the cabinet easier, if
necessary. Any extensions must be made with
cables suitable for the required power.
46
Fig. 27
Fig. 28
Fig. 29
Fig. 30