Operation; When The Oven Is First Installed - Zanussi ZOB 343 Instruction Booklet

Hide thumbs Also See for ZOB 343:
Table of Contents

Advertisement

Operation

Oven function control knob (Fig. 1)
The oven function control knob can have the following
symbols and functions:
0
OFF position
Conventional cooking - The heat comes from both
the top and bottom element, ensuring even heating
inside the oven.
Bottom heating element - The heat comes from
the bottom of the oven only.
Top heating element - The heat comes from the
top of the oven only.
Grill element- can be used for grilling.
Thermostat control knob (Fig. 2)
Turn the thermostat control knob to select temperatures
between 50°C and 250°C (MAX).
Thermostat control light (°C)
Once the oven temperature has been selected, the
temperature light will come on and remain on until the
oven has reached the correct setting; after that, it will go
on and off with the thermostat, showing how the tempe-
rature is being maintained.
Oven control light
It will come on every time an heating element is set on
operation.
The Safety Thermostat
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent

When the oven is first installed

Before cooking for the first time, carefully wash
the oven accessories.
Once the oven has been installed:
a) set the thermostat knob to MAX (250);
b) switch the oven function control knob to conventional
cooking (
);
c) allow the oven to run empty for approximately 45
minutes;
d) open a window for ventilation.
During this time, an unpleasant odour may be emitted.
This is absolutely normal, and is caused by residues of
manufacturing.
Repeat this operation for the grill. Once this operation is
carried out, let the oven cool down, then clean the oven
cavity with a soft cloth soaked in warm soapy water.
Fig. 1
Fig. 2
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Zanussi
Service Centre. Under no circumstances should you
attempt to repair the appliance yourself.
The Cooling Fan for the Controls
This oven is provided with a cooling fan, meant to keep the
front panel, the knobs and the oven door handle cool. This
fan may run on after the oven or grill is switched off, until
a normal temperature is reached.
Fig. 3
To open the oven door, always catch the
handle in its central part (Fig. 3).
0
13

Advertisement

Table of Contents
loading

Table of Contents