Touch Panel - Sharp MX-5500N User Manual

TOUCH PANEL

The touch panel (screen) shown in this manual is a descriptive image. The actual screen is slightly different.
Using the touch panel
Example 1
(1)
COPY IMAGE SEND
Job status screen.
Print Job Scan to
Job Queue
1 Copy
2 Copy
(2)
3 Computer01
4 0312345678
(1) Mode select keys
Use these keys to switch between copy, image send, and document filing modes.
(2) Settings for each function are easily selected and canceled by touching the keys on the screen with your finger.
When an item is selected, a beep will sound and the item will be highlighted to confirm the selection.
(3) Keys that are grayed out cannot be selected.
If you touch a key that cannot be selected, a double beep will sound. However, in a system settings screen, a beep will not
sound if you touch a key that cannot be selected.
Example 2
(1)
Special Modes
Margin Shift
Right Left Down
(1) If the initial state of a key in a screen is highlighted,
the key is selected. To change the selection, touch
one of the other keys to highlight that key.
(2) The keys can be used to increase or
decrease a value. To make a value change quickly,
keep your finger on the key.
(3) Touch this key to cancel a setting.
(4) Touch the [OK] key to enter and save a setting.
DOCUMENT
FILING
Fax Job Internet Fax
Sets / Progress Status
020 / 001 Copying
Waiting 1
002 / 000
1
Beep
Waiting
002 / 000
Tone
Waiting
001 / 000
(2) (3)
OK
Cancel OK
Side 1 Side 2
1/2 1/2
(0~1)
inch
Spool
Job Queue
Complete
Detail
(3)
Priority
Stop/Delete
Example 3
(4)
Special Modes
(0~1)
inch
(1) Some items in the special modes screen are selected
by simply touching the key of the item.
To cancel a selected item, touch the highlighted key
once again so that it is no longer highlighted.
(2) When settings extend over multiple screens, touch
the
screens.
12
Margin Shift Erase
Job
Pamphlet Copy
Build
Transparency
Covers/Inserts
Inserts
Book Copy Tab Copy
key or the key to switch through the
(1) (2)
OK
Dual Page
Copy
1
Tandem
2
Copy
Multi Shot
Card Shot