Sharp MX-5500N User Manual page 32

2
3
[Example]
Make sure that the positions of the tabs correspond with the originals as shown below.
4
Loading transparency film
When loading transparency film, load the film in the vertical orientation with the rounded corner at the top right.
Originals
1st sheet 2nd sheet 3rd sheet
32
Pull out the tray and attach the guide.
Slide the guide plate to the position of the bottom edge of the
tab paper and attach the guide so that it covers the guide plate.
Insert the tab paper into the tray.
Place the tab paper with the print side face up so that the tab is
to the left.
Tab Paper
4th sheet
4th sheet
3rd sheet
2nd sheet 1st sheet
Gently push the tray in and set the paper
type to tab paper.
Change the paper type setting to tab paper as explained in
"Paper Tray Settings" in the System Settings Guide.
Bottom
Front
side
Top